Determination of cationic surfactants in water samples by their enhanced resonance light scattering with azoviolet

A simple assay of cationic surfactants in water samples was developed based on the measurements of enhanced resonance light scattering (RLS). At pH 6.09 and ionic strength 0.03 M, the interactions of azoviolet (AV) with cationic surfactants, including zephiramine (Zeph) and cetyl trimethyl ammonium bromide (CTMAB), result in enhanced RLS signals characterized by the peaks of 470.0, 485.0 and 495.0 nm. The enhanced RLS intensity is proportional to the concentration of cationic surfactant of Zeph in the range of 0.2~6.0x10(-6) M, and to that of CTMAB in the range of 0.4~4.8x10(-6 )M. The limit of determination (3 sigma) is 2.1x10(-8) M and 3.8x10(-8) M for the two surfactants, respectively. Determinations of cationic surfactants in synthetic and tap water samples were successfully made with a recovery of 90.5~108.6%.     

Cu2(μ-dppb)2(μ-Cl)2的合成、晶体结构及非线性光学性质

The complex Cu₂(μ-dppb)₂(μ-Cl)₂ has been synthesized from the reaction of CuCl， dppb and (n-Bu)₄NCl. The crystal belongs to the triclinic with space group P1. The unit cell parameters are: a=9.939(4)?， b=10.083(6)?， c=14.104(5)?， α=76.46(3)°， β=71.02(2)°， γ=70.87(5)°. The single crystal X-ray diffraction analysis reveals that it has a bi-ring structure with a symmetry center at the middle of two Copper atoms. The outer ring is a 14-membered ring of Cu-dppb-Cu-dppb， and the inner ring is a 4-membered ring composed of two Cl^- and two Cu(Ⅰ). Investigation of third-order optical nonlinearity shows that it exhibits considerable nonlinear absorptive and self-defocusing effect with α₂=1.75×10^-13m·W^-1 and n₂=3.19×10^-18m²·W^-1. CCDC: 193113.     

Micellization and morphological characterization of Ag-micelles prepared by poly(vinyl acetate)–silver nitrate in solvent/nonsolvent system

The inducing method for preparing Ag-micelle solution with the use of mixed solvent/nonsolvent, and the morphological characterization of the generated metal–micelles were investigated and reported in this paper. In this method, an Ag containing metal chelate polymer (MCP) raw solution was preprepared by dissolving poly(vinyl acetate) (PVAc)–silver nitrate (AgNO₃) MCP in conc. formic acid, and a mixed solvent of HCOOH/H₂O with specific water composition was then added to induce the micellization of the MCP chain. The critical water concentration (CWC) that was needed for inducing the formation of the Ag-micelles, and the water concentration at which the flocculation of the Ag-micelles occurred in micellar solution, were studied by measuring the transmittance of the dilute MCP solution; the results showed that a long-lasting MCP solution with stable micelles might be prepared by using a H₂O/HCOOH solvent of specific weight ratio 1:1.2. The effect of the AgNO₃ concentration on the morphology of the Ag-micelles was also investigated by transmission electron microscopy (TEM). At AgNO₃ concentration below 0.5 wt%, the Ag-micelles displayed a variety of core-shell structure; but as the AgNO₃ concentration was increased to 1.0–2.0 wt%, micelles that had Ag-solid embedded in the micellar core were observed.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Interference of Copper(II) ions with Non-covalent Interactions in Uridine or Uridine 5′-Monophosphate Systems with Adenosine,Cytidine, Thymidine and their Monophosphates in Aqueous Solution

Coordination reactions of copper(II) ions and their effect on non-covalent interactions in uridine (Urd) or uridine 5′-monophosphate (UMP) systems with nucleosides (Ado, Cyd, Thd) and nucleotides (AMP and CMP) in aqueous solutions have been studied. At high pH the effective coordination centers are deprotonated N(3) atoms from Urd and Thd, whereas at low pH, the N(3) atoms of pyrimidine nucleosides are blocked for coordination and the metallation sites are endocyclic nitrogen atoms from Ado, Cyd, AMP and CMP. Moreover, at low pH, the main reaction center in nucleotide solutions is the phosphate group. The NMR study has proven the occurrence of non-covalent ion-dipole interactions and stacking interactions in the systems considered. Introduction of a copper ion in the majority of systems causes the disappearance of weak interactions between ligands. The structures of the complexes in solution have been inferred from the equilibrium study: an analysis of the pH range of their occurrence with respect to the pH range of deprotonation of particular groups in the compounds studied, using Vis, EPR and ¹³C as well as ³¹P NMR spectral analysis.     

Fast Marching Method for Calculating Reactive Trajectories for Chemical Reactions

We present a method for computing classical Newtonian trajectories that minimize the path length or transit time from reactant to product. Our approach is based on a generalization of the fast-marching method, which allows us to construct the solution of the Hamilton-Jacobi equation for the action that optimizes the desired quantity. The resulting “reactive paths” can be interpreted as reaction coordinates but, unlike more conventional choices, they contain dynamical information about the chemical system of interest.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Ab initio and infrared spectral study of 4′-substituted phenylthiolbenzoates

The geometry of the 4′-cyano-(4′-CNPTB) and the 4′-methoxy-(4′-MePTB) phenylthiolbenzoates were obtained by ab initio calculations employing 6–31G basis set at Hartee-Fock level of theory. The results predict an extended form of the molecules and torsional angle between the phenyl rings at 90.85(6)⁰ and 90.87(3)⁰, respectively. On the basis of vibrational analysis the frequency assignment was carried out. The calculated frequencies were compared with the experimental IR spectral data in carbon tetrachloride, carbon disulfide solutions and in solid state.     

铁-钼/活性炭催化剂的费-托合成反应性能

用微型固定床反应器和原位穆斯堡尔谱考察了在活性炭担载的铁-钼双金属催化剂上的费-托合成反应和在反应条件下的物相。已知在费-托合成中铁有利于生成长链烃,钼有利于生成低碳烃。铁-钼/活性炭催化剂则综合了铁和钼的性质,其中铁-钼/油棕炭催化剂具有很好的活性和液化石油气选择性。在反应中,富钼催化剂的主要物相为铁-钼碳化物,而富铁催化剂的物相则为铁-钼碳化物和e’-Fe_2·2C碳化铁。     

~(13)C-NMR研究聚丁二烯长支链支化

本文研究了用不同催化体系制备的聚丁二烯和加氢的聚丁二烯的~(13)C-NMR谱图。结合GPC测定支化度的数据,提出了二种可能的支化结构。以Ni及Co催化体系聚合的试样,支化点可能位于顺-1,4主链双键的α-次甲基上;而由Ni+Mo催化体系聚合的试样,可能为1,2-乙烯基的双键打开接长支链。